Consult An Expert
Dew Point Calculator
Enter your facility's temperature and humidity to instantly find dew point, frost point, and condensation risk — the numbers that tell you whether moisture is about to cost you money.
Enter Your Values
Your Results
Enter your temperature and humidity,
then calculate to see your results.
The Number That Predicts Condensation
When surface temperature drops to the dew point, moisture condenses — corroding equipment, damaging product, and creating slip hazards. Here's how to read the risk before it costs you.
Dew point is the temperature at which air becomes fully saturated and water vapor begins to condense on surfaces. The closer your air temperature sits to the dew point, the higher your condensation risk. That gap — the dew point spread — is the single most useful number for predicting surface moisture in a facility.
This calculator uses the Magnus-Tetens approximation, the standard formula in meteorology and HVAC engineering, accurate to within ±0.4°C across the normal operating range of 0–60°C and 1–100% relative humidity.
Td = (c·γ)/(b−γ)
b = 17.625, c = 243.04°C
When the dew point falls below freezing, the tool also reports the frost point — critical for cold storage, aerospace, and any environment operating near 0°C, where vapor deposits directly as ice.
Humidify Without Ever Reaching the Dew Point
4.2-Micron Dry Fog
Droplets evaporate mid-air before touching any surface — you hit target humidity without ever crossing into condensation.
Zero Wet Surfaces
No puddles, no corrosion, no mineral residue — even at relative humidity above 90%.
±1-2% RH Precision
Hold your target humidity within a tight band so your dew point spread stays exactly where you set it.
Optimal Humidity by Facility
Every environment has a target range where quality, safety, and efficiency peak. Find yours.
Common Questions
Everything you need to know about dew point and condensation control in industrial facilities.
Still have questions? Ask an expertReady to Eliminate Condensation for Good?
Talk to a Smart Fog engineer and get a custom humidity analysis for your facility — no obligation.