Smart Fog® ES100 Direct Space Humidifier

The ES100 from Smart Fog is a direct-space humidifier for commercial environments of all sizes. Purchase the ES100 to experience premium humidification at peak efficiency. Also checkout the ES100M for a mobile variation of this industrial humidifier.  

A Large Space Humidifier for Commercial Use 

Industrial success and productivity significantly depend on the atmosphere, temperature, and humidity levels of commercial and industrial buildings. The right indoor humidity levels assist industrialists with a wide range of processes, including production, designing, surface treatment, preservation of prototypes and the handling of technical equipment. Smart Fog can help you meet this goal with our high-quality, incredibly dependable industrial humidifiers for sale.

The ES100 humidifier uses Smart Fog® De-Correlation Technology — the most efficient way to produce water droplets for humidification. Each droplet is 4.2 microns, resulting in rapid evaporation and non-wet humidification. Each model comes with automated controls that execute precise humidification requests without direct oversight. The ES100 humidifiers can be wall mounted or inserted into ducts.

Our automated and efficient ES100 System specifically designed for simple installation and minimal upkeep means you'll achieve the following without increasing utility bills or compromising safety:

  • Non-wetting precise humidity control
  • Elimination of mold, bacteria and dust
  • No drains, no pumps or fans required

ES100 Industrial Humidifiers Models:

ES100-1
Standard Capacity:
1.5GPH ( 14 lb )
Minimum Temperature:
50°F
Compressed Air requirement:
2 CFM @ 90 psi
Energy consumption:
0.2 kW @ maximum capacity
ES100-1H
Standard Capacity:
0 to 1.5GPH
Minimum Temperature:
50°F
Compressed Air requirement:
2 CFM @ 90 psi
Energy consumption:
0.2 kW @ maximum capacity
ES100-2
Standard Capacity:
3 GPH ( 27 lb )
Minimum Temperature:
30°F
Compressed Air requirement:
4 CFM @ 90 psi
Energy consumption:
0.4 kW @ maximum capacity
ES100-2H
Standard Capacity:
3 GPH ( 27 lb )
Minimum Temperature:
30°F
Compressed Air requirement:
4 CFM @ 90 psi
Energy consumption:
0.4 kW @ maximum capacity
clean room humidification

Advantages

Experience the following advantages in your industrial setting:

  • Maintenance free, no moving parts
  • Fast and simple plug and play installation
  • 4.2 micron droplet size with Smart Fog® equal air spacing technology
  • Smart Fog® Double Cooling technology (Evaporative Cooling and Cold Fog)
  • Non-clogging mechanism
  • Modular system fits to any application and size.
  • Precise Relative Humidity Control (±1%) from 1% to 100% in any condition
  • Conserve Energy and Water
  • Safe! Low operating pressure
  • Eliminate mold, bacteria, viruses and insects
  • Complete dust suppression (any size partials)
  • High Quality workmanship, MADE IN THE USA
  • NO wet spots, Guaranteed

Low-Maintenance Humidification

The Smart Fog ES100 humidifier does not require any maintenance and does not contain any moving parts. The only maintenance required on the ES100 System is, replacing the filter elements in the ES100PB once every two years.

https://www.smartfog.com/wp-content/uploads/2014/08/img-007.jpgTYPICAL SYSTEM SETUP

Click the button below to download the brochure

DOWNLOAD

Included Accessories

ES100PB Control Center

Smart Fog® es100PB Control Unit is a reliable control center for the es100 system. Easy plug & play install and maintenance free design provides a durable industrial solution for humidity control application.

CPLC Controller

Smart Fog® es100PB Control Unit is a reliable control center for the es100 system. Easy plug & play install and maintenance free design provides a durable industrial solution for humidity control application.

S Series - Relative Humidity Sensor

The Smart Fog® S Series relative humidity sensors are designed to withstand harsh environments, and provide accuracy of 1% and 0.1% (depending on the model). All sensors are equipped with temperature compensation.

Pipe & Fittings Kit

All the pipe & fittings included with the Smart Fog system is made of PE. We provide you with all the pipe & fittings required to put the system together. The fittings we use are quick connect and easy assembly. All parts are reusable. Safe installation , no human hazard.

Optional Parts

Smart Fog® ZeroTDS® Filter System Four stage filter which removes all minerals from the water, providing pure DI water.

INJ-1 Chemical Injector

INJ-1 Chemical Injector

Fully automated precise injection of any water dissolving material. No priming required. User-friendly interface allows digital input of the desired ratio.

PC Communication Package

The easy to use PC Communication package can be used for data collection and remote system control.

Customized Programming, Alarms & Connections to Building Automation Systems

Our dedicated engineers are able to customized the CPLC Controller program to suit your application.
The CPLC Controller is able to communicate with most Building Automation Systems.