Smart Fog provides a powerful disinfecting solution. The ES100, providing uniform, fast distribution while penetrating the smallest hard to reach surfaces providing 100% application success. Certified for use with any chemical. Using our fully automated energy efficient ES100 System especially designed for simple installation & low maintenance you’ll be able to achieve the following without increasing utility bills or compromising safety:
Effective disinfection within minutes!
Use any water-soluble disinfectant of your choice.The Smart Fog ES100 Series disinfection equipment provide many critical features required to clean the germs and bacteria from the environment effectively.
Droplets penetrate hard to reach surfaces providing application success of the disinfectant.
The evaporating achieved provides a vehicle in transporting the chemical equally to the entire targeted area.
Series provides fully automatic disinfection process. The system allows for precise control with no need for calibration.
The proprietary non-wetting fog layer technology allows control over the surface contact of the chemical with the surface.
The ES100M series was developed and has been used for over 20 years to combat biosecurity issues for human applications, hospitals, pharma, and food safety.
There are many chemicals available that can disinfect and sterilize the environment without leaving any residue. The speed, coverage, and reliability make the Smart Fog system the best choice for your disinfecting and sterilization needs.
“Our corporate office could not have stayed operational without the disinfecting technology and poweful equipments that Smart Fog sold to us.”
“When our new corporate campus opened, we trusted in Smart Fog Equipments . We are so pleased with it, they are vital to our operations.”
The ES100 units can be either wall mounted next to the air handlers, suspended from the roof or inserted in the duct system. The installation is specifically designed for plug and play and does not require any special tooling. All of our standard piping are flexible plastic pipes which makes the installation quick and easy.
The system operates using compressed air and water. The system requires at least 100 psi (or can be calibrated lower if needed) of compressed air and any water pressure available (even a reservoir with no pressure). Power is required only for the CPLC control unit. The unit requires any available 1 phase AC voltage, 2A.
Yes. Our system is specifically designed as a non-wetting humidification system. Which means that it would not wet anything underneath it. The system is also designed to avoid condensation by gradually building the humidity.
Hard water is not an issue for our system. Our main concern with water quality is the silica level in the water. If Silica is present, we offer a ZeroTDS® filter system which extracts all the minerals from the water. If dust is a concern, we highly recommend having the ZeroTDS® water filtration, to avoid any dust generated by the mineral content in the source water.